Fuser Unit for Konica Minolta Bizhub C224e C258 C284 C308 C364 C368 A161R71999

Optimize your Konica Minolta Bizhub printer with the best, new-quality fuser unit available. Fusers are the most important part of the print production process because they 'fuse' the toner to the paper so that it will stay on the paper after it leaves the printer due to the heat and pressure that the fuser applies when operating. If you experience smudged prints, toner coming off of the printed document, and frequent paper jams in the rear of the machine, chances are you need to replace your fuser.

The fuser unit we supply is designed to meet or exceed all manufacturers' specifications and will provide constant print quality and continue to operate reliably during normal use. Fusers are key parts of the office copier as they produce clean, professional-quality printed documents consistently from page to page.

• Product Type: Fuser Unit / Fusing Heating Unit Assembly
• Condition: New / Compatible (Please specify based on your actual stock)
• Compatible Printer Models:
  • Konica Minolta Bizhub C224 / C224e / C224P
  • Konica Minolta Bizhub C258
  • Konica Minolta Bizhub C284 / C284e
  • Konica Minolta Bizhub C308
  • Konica Minolta Bizhub C364 / C364e / C364P
  • Konica Minolta Bizhub C368
• Note: Please verify your printer model number before purchasing to ensure compatibility.

1. ⚠️ High Temperature Warning: The fuser unit operates at extremely high temperatures. Always turn off the printer and allow it to cool down for at least 45 to 60 minutes before attempting removal.
2. Power Safety: Disconnect the printer from the power outlet to prevent damage during installation.
3. Handle with Care: Do not touch the surface of the pressure roller or the heating element with bare hands, as skin oils can cause print defects. Avoid scratching the roller surface.
4. Check Connections: Ensure all electrical connectors and harnesses are securely plugged in when installing the new unit.
5. Reset Counter (If applicable): Some Konica Minolta models may require a service mode reset for the fuser unit life counter after replacement. Please consult a service manual if an error code persists.
6. Test Print: After installation, print multiple test pages to verify that the toner is fixing correctly and that no error codes appear on the display.